Canon imageRUNNER C3100 N - Manual (Page 62)

PCL/PS Settings 2-32
2
Pr
inter Settings Men
u
PS
■ Job Timeout
0 to 3600 seconds; 0 * seconds
This setting enables you to specify the amount of time before a job times out. If a
job has not finished within the set time limit, the job automatically cancels.
■ Wait Timeout
0 to 3600 seconds; 300 * seconds
This setting enables you to specify the amount of time the machine will wait for
data sent from the host computer before it times out. If data is not received within
the set time limit, the job automatically cancels.
■ Print PS Errors
On, Off *
This setting determines whether an error page is printed when an error is
encountered.
■ RGB Source Profile
sRGB * , Gamma 1.5, Gamma 1.8, Gamma 2.4, None, and Download Profile
This setting allows you to define the characteristics of the RGB profile (color data
represented using the RGB (Red Green Blue) color model) that is appropriate for
your monitor, used when printing color images or graphics in a document. This
ensures that the machine uses the most appropriate color conversion when
printing color documents using the CMYK (Cyan Magenta Yellow blacK) color
model.
sRGB
This setting specifies the industry standard definition for generic Windows (PC)
monitors. If you are using an sRGB compatible monitor, you can print out colors
close to how they appear on your monitor.
Gamma 1.5, Gamma 1.8, and Gamma 2.4
These settings enable you to select the gamma correct level of the RGB data. The
higher the value, the darker the printout.
None
When this setting is selected, device-dependent RGB data is converted into
CMYK without the machine applying the RGB color model.