Canon imageRUNNER C3100 N - Manual (Page 56)

Settings Menu 2-26
2
Pr
inter Settings Men
u
Compressed Image Output
Output * , Display Error
This setting enables you to specify how the data should be treated if the data size
of the print job is too large to be stored in the machine's internal memory.
If [Output] is selected, the data is highly compressed (so it is able to stored in the
internal memory), and then the job is printed. However, the print quality may
diminish.
If [Display Error] is selected, the job is canceled when the data size is too large.
NOTE
• Even if [Output] is selected and the data is highly compressed, the data may still be
too large to be stored in the machine's internal memory. In this case, the job is
canceled and an error is logged in the Print Log. (See Chapter 5, "Checking Job
and Device Status," in the Reference Guide.)
Initialize
-
The menu settings can be reset to the factory defaults by initializing the printer
settings.
If you select Initialize, the confirmation message <Is it OK to initialize the
settings?> is displayed. If you select [Yes], the settings are initialized. If you select
[No], the settings are not initialized.
IMPORTANT
Do not turn OFF the machine while the settings are being initialized, as this may
damage the machine's memory.