Cisco XM Universal Gateways Cisco AS5400XM - Manual (Page 39)

3-9
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
Chapter 3 Installing the Cisco AS5400XM Universal Gateway
Connecting the Console Terminal and Modem
Connecting the Console Terminal and Modem
Use the console terminal for local administrative access to the Cisco AS5400XM universal gateway. You
can only connect a terminal to the console port. You can use the auxiliary port to connect a terminal or
a modem for remote access.
Connecting to the Console Port
To connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the console
port, follow these steps:
Step 1 Connect the terminal using an RJ-45 rollover cable and an RJ-45-to-DB-25 or RJ-45-to-DB-9 adapter.
The adapters provided are labeled TERMINAL. Other types of adapters are not included. (See
Figure 3-10 .)
Figure 3-10 Connecting the Console Terminal
Note For additional information on rollover cable pinouts, see Appendix C, “Cabling Specifications.”
30845
Console port
(RJ-45)
RJ-45-to-RJ-45
rollover cable
PC (laptop)
RJ-45