Cisco XM Universal Gateways Cisco AS5400XM - Manual (Page 79)

B-13
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
Appendix B Replacing the Power Supply
Installing the Power Supply
Figure B-13 Reconnecting the Power Cables to the Backplane
Step 4 Route the fan cables as shown in Figure B-14 . Note that the two longest cables are connected to the two
installed fans on the right. The connectors to these two fans will fit into the space between the second
and third fans.
Caution Route the fan cables carefully to avoid pinching the cables near the bridge lance. (See Figure B-14 .)
Front panel
14131
Power
connector
6-pin
connector
Backplane
Power supply
12V connector