Cisco XM Universal Gateways Cisco AS5400XM - Manual (Page 96)

Index
IN-2
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
T1 and E1 interface ports 3-7
WAN 3-6
console and auxiliary port type 1-4
console port
cables C-2
EIA/TIA-232 connections 3-9
pinouts C-2
console port, connecting 2-5
console port, default parameters 2-5
console port connection (figure) 3-9
console port signaling and cabling using a DB-25 adapter
(table) C-3
console port signaling and cabling using a DB-9 adapter
(table) C-2
conventions, document viii
D
data rate, E1 2-4
data rate, T1 2-4
data rate, T3 2-4
DCE, auxiliary port 2-5
DCE, console port 2-5
DC power connections 3-13
DC power supply
wiring 3-13
DC power supply connections (figure) 3-14, A-3, A-11, B-3,
B-19
DC power supply installation warning 3-12
DC power supply specifications 1-4
DFC, description 1-3
dial feature cards, description 1-3
dimensions, Cisco AS5400 chassis 1-4
disconnecting the fan cable (figure) B-8
disconnecting the power connectors from the backplane
(figure) B-9
displaying environment status 4-4
display power supply status B-20
document conventions viii
document organization vii
drop and insert, enable and disable 4-6
Drop and Insert mode 4-6
DTE, auxiliary port 2-5
DTE, console port 2-5
E
E1 data rate 2-4
E1 impedance rating 2-4
E1 line rate 2-4
EIA/TIA-232
auxiliary port connections 3-10
console port connections 3-9
Electrostatic Discharge (ESD) 2-2
environment monitoring 4-3
environment status, displaying 4-4
equipment, required for installation 2-3
error messages, compact flash A-7
error messages, memory A-9
ESD, preventing damage 2-2
ESD wrist-strap safety 2-2
Ethernet connections 2-5, 3-6
F
fan cable routing (figure) B-16
fan removal (figure) B-6
Figures
Attaching the Chassis to the 19-Inch Rack—Rear Panel
Forward 3-5
Attaching the Rubber Feet 3-2
BITS Port Connection C-5
Cisco AS5400 Chassis A-10, B-18
Cisco AS5400 Front Panel 1-2
Cisco AS5400 Rear Panel 1-2
Connecting a Modem to the Auxiliary Port 3-10
Connecting the 6-Pin Connector to the System
Board B-12
Connecting the AC Power Cord 3-13