Cisco XM Universal Gateways Cisco AS5400XM - Manual (Page 4)

Contents
iv
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
2T Serial Ports 2-6
Alarm Port 2-6
BITS Port 2-6
Power Supply Considerations 2-6
C H A P T E R
3 Installing the Cisco AS5400XM Universal Gateway 3-1
Setting Up the Chassis 3-1
Setting the Chassis on a Desktop 3-2
Rack-Mounting the Chassis 3-3
Connecting to the Network 3-5
Connecting to an Ethernet Network 3-6
Connecting to a WAN 3-6
Connecting the Console Terminal and Modem 3-9
Connecting to the Console Port 3-9
Connecting a Modem to the Auxiliary Port 3-10
Connecting to the BITS Port 3-10
Connecting to the Alarm Port 3-11
Supplying Power 3-12
Connecting the AC Power Cord 3-13
Wiring the DC Power Supply 3-13
Where to Go Next 3-15
C H A P T E R
4 Troubleshooting 4-1
LEDs 4-1
Mixing WAN DFCs 4-2
Environment Monitoring 4-3
Displaying Environment Status 4-4
Using the Bantam Jacks for Test Port Functionality 4-6
Monitor Mode for the T1, E1, and T3 DFCs 4-6
Drop and Insert Mode for the CT3 DFC 4-6
Troubleshooting Network Interfaces 4-7
Getting Help 4-7
A P P E N D I X
A Replacing Memory Components A-1
Removing the Chassis Cover A-1
Required Tools A-1
Safety Recommendations A-1
Chassis Cover Removal A-2