Operations using cd direct key, To record an input source, Tape dubbing – Kenwood KR-V9020 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Operations using CD DIRECT key
To enjoy more pure and high-quality sound of
Compact Discs:
1, Press the CD key
2, Press the CD DIRECT key.
VIDEOID
TAPE 2
(MONITOR)
TAPE 1TUNERPHOND EP
■ To record an input source
1. Select the source to be recorded with the input
selector keys.
2. Play the source,
3. Set tape deck 1 and/or tape deck 2 to record mode.
Note: -----------------------------------------------------------------------------------------
When a tape deck is connected to this unit with a System Control
cord, all of the input selector keys are disabled during recording
and do not function until recording is finished, This will prevent
the recording from being interrupted.
3, Play the CD player.
• The CD DIRECT key is given priority over the setting
of the input selector keys.
• The graphic equalizer cannot be used while the CD
DIRECT key is ON.
•To cancel the CD DIRECT input, press the CD
DIRECT key again or press one of the input selector
keys (except CD and TAPE 2 keys). The input will be
switched to the source indicated on the display.
Note: —------------------------------------- --------- ------------------------------------
When the CD DIRECT key is pressed in one of the Surround
modes (□□ PRO-LOGIC, THEATER or HALL SURROUND), the
unit enters the Bypass mode.
■ Tape dubbing
Tape recordings may be duplicated (dubbed) easily using
two tape decks connected to the TAPE 1 and 2 jacks.
For example:
(TAPE 1 to 2):
1. Connect two tape decks to the TAPE 1 and TAPE 2
jacks.
2. Press the TAPE 1 key,
3. Play back the recorded tape and adjust the recording
levels before starting tape dubbing.
(TAPE 2 to 1):
1. Press the TAPE 2 key,
2. Press a key other than TAPE 1 of the input selector
keys such as CD.
3. Play back the recorded tape and adjust the recording
levels before starting tape dubbing.
4. Do not press the TAPE 1 key during recording with
tape deck 1.
Note: ------- ------ ----------------- --------------- —-------------------------------------
Adjust recording levels on the deck that is making the copy using
that deck's operating controls.