Kenwood KR-V9020 - Manual (Page 30)

HflP
'i'ir
Surround effects
■ THEATER SURROUND, HALL SUR^
ROUND adjustment
1, Press the THEATER or HALL Surround key,
2, Adjust the rear speaker output level with the REAR
LEVEL control keys.
• The REAR LEVEL control range is from +20 dB to
— 50 dB of the front speaker level.
■ Delay time adjustment
The output signal from the rear speakers is delayed
slightly than that of front speakers for each Surround
mode separately. The delay time can be adjusted as
desired separately for the □□ PRO LOGIC and THEATER
SURROUND modes. The delay time of the HALL SUR­
ROUND mode is fixed at 30 ms and cannot be adjusted,
1. Press theDD PRO LOGIC or THEATER key.
2, Adjust the delay time using the DELAY TIME keys.
• For the □□ PRO LOGIC mode, the delay time can be
adjusted between 1 5 ms and 30 ms in 1.5 ms steps.
• For the THEATER SURROUND mode, the delay time
can be adjusted between 0 ms and 30 ms in 1.5 ms
steps,
■ To play sound with the Surround effect
1. Set the SURROUND key to ON,
• The selected Surround mode indicator lights,
2. Select the source to be played with the surround sound
effect, and play it.
3. Adjust the volume level,
• The VOLUME CONTROL allows you to increase or
decrease the volume level of all of the front, rear and
center channels simultaneously.
Note; ---------------------------------------------------------------- —---------
When this unit is in DOLBY PRO LOGIC SURROUND mode, the
graphic equalizer will operate only In '"SET" mode. Otherwise,
graphic equalizer operation will be canceled by the "'DEFEAT"
function. Therefore, when it is desired to use the graphic
equalizer when the unit is in DOLBY PRO LOGIC SURROUND
mode, press the PGM/SET key to set to "SET" mode.
■ To release the Surround mode
Press the BYPASS key.
• Be sure to set the BYPASS mode when the Surround
effect is not required.
BYPASS nnpRO-LOGlC THEATER HALL
BYPASS key