Kenwood KR-V9020 - Manual (Page 37)

Original functions of keys
LEARN/USE select switch
Set to the USE position.
Caution in Remote Control
• If the CD player is not equipped with the System
Control jack, it cannot be operated properly from this
remote control unit. In such a case, please use the
remote control unit provided with the CD player,
• If any of the following KENWOOD component mod­
els is used, this remote control unit cannot be used to
control the CD manual search function or to make
entries with the numeric keys (1 to 0 and -f1 0):
DP-M97, DP-57, DP-47
LEAR h I^J] ^aTRAWSMlT
,RN . . USE AUDlo\‘'^°AUK
□no CUED
TV/VIDEO----------- TV CH-^ -TV VOL^—
I I rvn
_______ TAP£/V)DEO
rwi C3D
CD/VDP_
Bivii] fHMil [FRI [Disci
n~l [FFH rTii~|
Tv/vweo
I--- 1
[ZD
nU QD dJ DO DO
DO rr~| [~B~| [~fl~] r~5~i
H CO DO [O CO
..liWtRo FiSTO
SYSTEM MEMORY ll PHOHT
DO [Q [OilIQ] to
CD ED.
dD DID
PHONO VIDEO 1
DZl 1 1
DU DZ] DID
d M eh
1 — 1 1 1 1 — 1
TUNER VICEO 2
DU DZ]
DELAY TIME
.¿lb.
TAPE 1 VIDEO 3
DID DID
CENTER LEVEL
TAPE 2 VIDEO A
VOLUME
REAR LEVEL CONTROL
1--- 1 1--- 1
POWER
S S
AUDIO TV VIDEO
MUTE
CZD
KENWOOD
Mode switch
Set to the AUDIO
or VIDEO
TAPE deck control keys
(Mode switch: AUDIO)
VIDEO deck control keys
(Mode switch: VIDEO)
TAPE/VIDEO
Am mB
□FU nei [ nm
VIDEO CH.
\*^\ IBM ^11^1
TV/VIDEO
Use the A/B select switch to specify the A deck or B deck
of a dual-transport cassette deck.
The darkened keys (marked do not function at
this time.
(Mote: --------------------------------------------------—-------- --------- ---------------
\A/hen it is necessary to press the fast forward key after the
rewind key, be sure to press the stop key before pressing the fast
forward key.
The darkened keys (marked do not function at
this time.
When remotely controlling the KV-D957S from KEN­
WOOD (for U.S.A, and military), set the A/B select switch
to A.
VIDEO CH keys:
Pressing the key shifts the channel tuned on the VIDEO
deck upward, and pressing the key shifts it downward.
TV/VIDEO key:
Every time this key is pressed, the output from the video
deck is switched between the TV channel RF output and
video output.