Kenwood KR-V9020 - Manual (Page 33)

On-screen display
With this function, a connprehensive character display appears on the monitor screen every time an input selector key, etc.
is pressed.
There are six screen display patterns,
Each time the MENU ON SCREEN key on the remote control is pressed, the screen pattern is changed in the following
order:
__ Screen 1
(AUDIO)
Screen 2 .
(VIDEO) Screen 3
(SURROUND)
Screen A
(TUNER PRESET)
-Screen 6 (ON SCREEN OFF) Screen 5 (ON SCREEN STANDBY)
When one of the first four screens (Screen 1 to Screen 4) is displayed, it will be maintained until a key corresponding to
the screen menu is pressed,
With Screen 5, when a relevant key is pressed, the screen corresponding to the key will appear for 5 seconds and then go
out.
With Screen 6, there is no display on the monitor screen,
1. SCREEN 1 (AUDIO):
• Displays each setting of the various audio sources.
Displays the tuner station name, preset channel, receiving
band, and receiving frequency only when TUNER is
selected.
Displays the REC mode for TAPE 1.
Displays the REC mode for TAPE 2,
Displayed only when activated,
Displays the MONITOR output.
2. SCREEN 2 (VIDEO):
• Displays each setting of the various video sources.
Displayed when AUDIO INJECTION is activated.
(THROUGH DUBBING is also displayed when engaged)
Displayed only when EQ REC is activated.
3. SCREEN 3 (SURROUND):
• Displays each setting related to Surround sound.
Displayed only when Dolby Pro-Logic is selected.
Displayed only when Dolby Pro-Logic ''NORMAL" or
"WIDE" is selected.