Cable box setup, Setting up the vcr – RCA VR628HF User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING UP THE VCR
6. Turn on your satellite receiver and tune it to channel 100 and
then press MENU»PROG. Follow the on-screen directions.
OSS SETUP
Please
turn o n your
OSS Re cei ver and tune
it to
channel
100.
Press
MENU to
continue
Once you have completed the setup, the VCR confirms the
DSS Setup is completed or canceled.
CABLE BOX SETUP
This setup applies only when all channels are received through
the cable box. There are two options;
•
The first sets up the VCR for the output channel of the cable
box signal.
•
The second sets up the VCR for remote-controllable cable
boxes so it can control the cable box by changing channels
for timer or VCR Plus+ recordings. Position the remote-
controllable cable box on top of the VCR as shown in the
Connections section.
1. Press MENU*PROG to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
A Channels
5
Preferences
6 Audio
7 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
CABLE
A VCR Plus+ Channel List
5 Cable Box Setup
6 DSS Setup
0 Exit
10