Pr06raa\min<1the remote – RCA VR628HF User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PR06RAA\MIN<1THE REMOTE
PROGRAMMINO THE REMOTE TO
CONTROL A DIGITAL SATELLITE
RECEIVER OR CABLE BOX
The remote is programmed to control an RCA, GE, or ProScan
digital satellite receiver.
If you have another brand of cable box or digital satellite
receiver with its own remote, you may be able to use the VCR s
remote to operate it.
1. Turn on the cable box or digital satellite receiver.
2. Look up the brand and its code number(s) in the code list
on the right.
3. Press the SAT-CABLE button on the remote.
4. Enter the three digit code form the code list.
5. Release the SAT-CABLE button and press PWR or CHAN up
or down to see if the cable box or receiver responds to the
remote commands.
OPERATE THE CABLE BOX OR DIGITAL
SATELLITE RECEIVER
After you have set up your remote, see which buttons will
operate your cable box or digital satellite receiver.
1. Point the remote at the box or digital receiver, and press
SAT-CABLE and then PWR.
2. You may want to experiment to see which buttons will
operate your cable box or digital satellite receiver. Try pressing
buttons, such as CHAN up or down.
40