Cable box setup, Setting up the vcr – RCA VR628HF User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING UP THE VCR
3. Press 5 to display CABLE BOX SETUP. Then select one of the
three choices.
CABLE BOX SETUP
Do
you
U S
e your cable
bo X to re ceive ALL
ch anne 1 sor only SOME
Ch annels?
1
ALL cha nnels
2
Only SOME channels
3 Cancel
setup
4. If you selected ALL channels, enter the output channel of
your cable box, usually 03, 04, or video line input and
press MENU.
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4, or Video)
Enter 01-13 or INPUT
Press MENU to cancel
Once you complete the setup, the VCR confirms that the VCR
will now receive all signals on the designated channel.
5. Press MENU*PROG and select whether your cable box is
remote controllable.
CABLE BOX SETUP
Can your
cable box be
operated
with a remote
control 7
1 Yes
2 No
6. If your cable box is remote-controllable, turn it on and tune it
to channel 2. Press MENU»PROG to continue.
CABLE BOX SETUP
Please
turn on
your
Cable
Box and
tune
it to
channe 1 2.
Press
MENU to
conti nue
Cable Box Setup
ALL channels: enter two numbers for
output channel of your cable box or
press INPUT.
Only SOME channels: if you only use
the cable box to tune premium
channels.
Cancel setup: select to cancel.
11