First things first, Step 4: plug in the vcr, Steps: tune the tv – RCA VR628HF User Manual
Page 9: Step 6: turn on the vcr, Step 7: access the menus
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIRST THINGS FIRST
STEP 4: PLUG IN THE VCR
Match the wide blade of the plug with the wide slot in the
outlet. Be sure to insert the plug completely.
STEPS: TUNE THE TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input, depending on
the connection you've chosen.
•
If you connect your VCR using the ANTENNA connectors with
RF coaxial cable, set the 3CH4 switch to channel 3 or channel
4--the channel you want to use on your TV.
•
If you connect your VCR using the AUDIOA^IDEO jacks with
audio/video cables, select the TV's video input to see the
signal. See the TV Owner's Manual.
STEP 6: TURN ON THE VCR
Press POWER on the VCR's front panel, or VCR on the remote to
turn on the VCR. To set up the VCR, you will need to understand
how to move through and change items in the on-screen menus.
STEP 7: ACCESS THE MENUS
The MENU»PROG and number buttons let you access, select and
change menu items. For example, to change the AUTO PLAY
setting, you would do the following;
VCR Viewing Channel
When using the IN FROM ANT and OUT
TO TV jacks to connect your VCR, tune
your TV to channel 3 or 4.
When using the audio/video jacks to
connect your VCR, tune your TV to the
TV's video input.