Tv with rf jack only, Using this connection, Connections – RCA VR628HF User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/671198/56/background.png)
CONNECTIONS
TV WITH RF JACK ONLY
This connection assumes;
•
You are connecting antenna, cable, or cable box system.
•
Your television has only an RF input jack.
This connection provides;
•
Mono sound playback from VCR.
•
Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have;
•
(1) coaxial cable for cable or antenna connection; (2) for
cable box
If your cable box is remote controllable;
•
Position it on top of the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.
To connect;
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
VCR
...................
\
'i
CABLE BOX
........... ..
VCR'S \
SIGNALS %
TRANSMITTERS
WALL
'.t
Position Remote-Controllable
Cable Box
Using This Connection
Tune your TV to channel 3 or 4, whichever one you selected
with the 3CH4 switch on the back of the VCR.
Auto TV/VCR Setting:
• Set the Auto TVA/CR feature to ON.
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
2. Press the TV«VCR button, and select a different channel
on the TV.
52