Using this connection, Connections – RCA VR628HF User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
TV WITH AUDIO/VIDEO JACKS AND SATELLITE RECEIVER
This connection assumes:
•
You have an advanced satellite system.
•
Your TV has audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR.
•
Recording from receiver while watching cable or off-air
channel.
•
Recording one cable or off-air channel while watching another.
If your digital satellite receiver is remote controllable:
•
Position it on top of the VCR as shown. Make sure not to block
any of the VCR's ventilation holes.
To use this connection, you must have:
•
(3) coaxial cables and (6) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to the First Things First, then follow the steps.
Using This Connection
•
To record from the satellite receiver, tune your VCR to its line
input (LINE appears in display).
•
Tune your TV to its video input to watch the VCR or satellite
receiver.
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to OFF. Use of TV*VCR button is
not required.
To play a tape:
1. Insert a tape
2. If necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Begin recording a program using a recording feature.
2. Select a different channel on the TV.
To record a satellite receiver program and watch a cable or
off-air channel:
1. Turn on satellite receiver, tune the VCR to its line input, and
begin recording a program using a recording feature.
2. Select a different channel on the TV.
W SATELLITE RECEIVER *:
1 ..................... .............
R
........ _____________
■ .............................. ...........4^
1/ 1------------------------ 1
J
1 J
VCR'S
SIGNALS ,
TRANSMITTERS
Position Remote-Controllable
Satellite Receiver
)
r
I AN!
CABLE OR
I
ANTENNA
56