Using this connection, Connections – RCA VR628HF User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
TV
WITH
AUDIO/VIDEO
JACKS
AND
CABLE
BOX
TO UNSCRAMBLE PAY CHANNELS ONLY
This connection assumes:
•
You are using a cable box only to unscramble premium
channels.
•
Your TV has audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR.
•
Recording a scrambled or unscrambled channel through the
cable box while watching an unscrambled channel.
To use this connection, you must have:
•
(3) coaxial cables
•
(3) audio/video cables
•
(1) splitter
If your cable box is remote controllable:
•
Position it on top of the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel. Use of TV*VCR button is
not required.
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to OFF.
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record a scrambled or unscrambled program and watch
another unscrambled program:
1. Begin recording a scrambled or unscrambled program
through the cable box using one of the recording features.
2. Select an unscrambled channel on the TV.
VCR
....................
CABLE BOX '
............
T ................
VCR'S
SIGNALS
TRANSMITTERS
WALL
•-t
Position Remote-Controllable
Cable Box
All scrambled channels must be
viewed through the VCR.
For Cable Box Setup, select ALL
channels. See
page 11.
54