Auto play, Autotva^cr, Auto tv/vcr – RCA VR628HF User Manual
Page 23: Auto play autotv/vcr, Setting up the vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING UP THE VCR
The VCR will only respond to the compatible remote's VCR2,
VCR2»LD, or VCR2*DVD button. If you change the remote
setting to VCR2, the remote that came with your VCR will no
longer control it.
Use the compatible remote to change the remote setting back
to VCR1. Display the PREFERENCES menu, press 1, and then press
VCR on the VCR's remote.
AUTO PLAY
This feature allows the VCR to automatically start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
•
Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
•
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
AUTOTVA^CR
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode, when the VCR is turned on.
Press 3 to switch between ON and OFF.
•
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This only
applies if you connect the IN FROM ANT and OUT TO TV
jacks of your VCR and TV and watch your VCR on channel 3
or 4 of your TV.
•
Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV's video input
and you don't want your antenna/cable signal interrupted
by the VCR.
Auto TV/VCR
Pressing TV»VCR will still switch
between the VCR and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
19