RCA Flat Panel Television - Manual (Page 44)

Using tiMi 'TV's WlenM System
......
I ' .... .' ■
1115
Audio Menu
The Audio menu lets you adjust audio output. To aceess tlie Audio menu, press
MENl-i on the remote, and then select Audio from the main menu, The following
audio items can be adjusted; Sound Preset Mode. Sound logic. Balance, and
A d m n ced A i id io.
Sound Preset Mode
You can select one of the seven-lrand Sound Preset Modes or create your own
personal preset, The seven-laand grajahic ecjualizer lets you adjrrst the audio
frequency settings. The equalizer can only be changed if Fixed/Variahle Out
is set to Variable Level, Speakeis On in the Advanced Audio menu. If Fixed/
Variable Out is .set to Fixed Level, you cannot make chan.ges to th.e eciualizer
and the bands ai'e .set to OdB. However, the graphic: et[ualizer levels for Variable
Level. Speakers On are stored in memoiy in case you switch from Fixed Level
back to Variable Level, Speakers On.
Note: Sound. Preset Modes are stored for each input. All other audio
feature settings are stored, globally across all inputs and not per input.
Sound Logic
Ac:ting like a dynamie range limiter, it compresses the dynamic: range to limit
stidden volume increases (for example, the sudden increase in volume you
sometimes hear when a c:ommerdal staits). Choo.se On or Off, dejaending on
your preference,
Balance
The Balance setting applies to the internal speakers a:nd the headphone output.
Balance is how much audic) (loudness) gets sent tc) the left and right speakers.
Note: Balance applies if Flxed./Variable Out is set to Variable Level.
Speakers On. See the folluunngpage for more inforniation.
Advanced Audio
The Advanced Audio menu has options that allow you to adjitst audio input and
outpi.it. The options ate;
Sound Expansion Displays a choice list <af availa ble audio modes, which
control the way the sound comes through your speakers when the TY' is
set to using the Variable Outpiit. The .selected setting affects all inpi.its and
tuners.
To create the settings:
1. .Press th.e MENU burton (th.e Main Menu appears).
2. Selea Advanced Audio, and then Sound Expansion. The following
options appear:
44 Chapter 4