RCA Flat Panel Television - Manual (Page 51)

Chapter 5: Other Information
Frequently Asked Questions (FAQs)
Why does my TV take so long to turn on?
Quick Stanup is a power-saving feature in your IVe Select either enable or disable, which ever option is best for you.
Enabling Quick Stanup allows you to turn on the IT faster than if disabled . Keeja in mind, if you disable Quick Stanup
it adds approximately 30 seconds to your TV’s turn on time.
What’s the quickest way to view High Definition (HD) video?
Cionnect ati. off-air atitenna to the ANTENNA,'(i;A15LE .INPUT to vieov free local digital channels. You might need to
purchase an antenna. Go to page 8 for more information.
How do I teU an analog channel from a digital channel?
There are .several different ways to tell if your channel is digital or not. Press the INFO button to disjslay the channel
banner, Look at the left c:orner for a channel information. Channels displaying a i>, prirnaiy channel, and a subchannel
are digital diannels (not all digital channels have subchannels). Channels displaying an A, are analog. Go to jaage 31 for
metre information.
Wliy does channel search find a lot of channels, but when I try to tune to them there’s nothing there?
Some channels are enabled by the cable comjaany that donf carry programming, such as video-on-demand. Wheir
channels are unavailable, your IT’s screen displays Weak or No Signal. You probably want to get rid of these so they
no Ittnger appear in your channel list. Remove the.se in the Channel Setup menu. Go to page 3^ for more information.
Why does the first channel search take a long time?
If you’ve checked each box in the channel search menu, the lY’ is looking for all available channels in the channel list.
If yon do have digital channels, the lY’ is also searc:hing for each subchannel of that digital channel,
How do I control other devices I’ve connected to the TV?
Becau.se your lY^ came with a universal remote, you can program your remote to the button corresponding with the
device yoi.i have connected to yoi.ir fY’. Go to page 23 for information on programming yoi.ir remote.
Why do 1 have sound, but no picture when I turn on my TV?
There is a lamp inside the TV which needs approximately one minute to reach full brightness. Yotfll hear audio during
this time and the picture increasingly gets brighter as the lamp warms up.
Why are there bars on my screen and can I get rid of them?
Analog channels a.i:e sent in a 4 x 3 fonnat, which cannot fill a 16 x 9 screen like you.i: T\c Mo.st digital channels are
sent in a 16
X
9 format which do hll your screen, but sometimes are .sent in 4
x
3- h depends on how the station or
clev'ice cotinected to your Tv' is formatting the video. Press the ZOOM button to see the different formats available
that may eliminate the bars. Go to page 42 for more information on screen format,
Graphics coniained wilbin this publicaiion areJbr represerdaii&n otdy.