Status clear and memory clear operations, Status clear, Operating procedure – Toshiba TEC MA-315-100 User Manual

Page 136: Thank you call again

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

EOI-11069

26. Status Clear and Memory Clear Operations

The operations described in this chapter are provided for initial start-up of the

machine or emergency but not to be operated as part of daily routines. Do not
perform any of these operations unless it is really necessary.

Status Clear

The operation defined as “Status Ciear” will only clear an error or key-locked condition that

disables normal operations (though it seldom happens). Thus neither the sales data nor the
programmed data will be cleared by a Status Clear (except that when a Status Clear is operated

to clear a key-locked condition during a sale, the sale item data already entered for the current

sale will only be cleared).

The Status Clear also has the function to obtain the condition “after all sales data resets” (as if all

sales data had been reset) but will not actually affect any sales data. Such a condition is required
in some programming operations and is usually obtained by taking the required reset reports.

However, when you do not want the sales data to be reset because it is still in the business
hours, etc., this function of the Status Clear will be effective. But be careful in using the function;
depending on the programming item, sales data resets may really be necessary instead of a
Status Clear, to keep consistency between the programmed data and the sales data.

Operating Procedure

Condition:

Any time, outside or during any operation sequence

Operation:

Remove the plug of the register’s power cord from the wall outlet (to turn OFF the power).

MGR

Use the

S Key

to turn the

Control Lock to

“BLIND”.

i

Plug in the cord (to turn ON the power).

A Status Clear receipt is issued.

Status Clear Symbol Line

Date, Register No., Consecutive
No.,

ancf 77me

are not reset.

Thank you

Call again

1 1.- 0 3.- 9 2

No 1 1 ^ 3 0 0

1^ 0 0 *0.0 0

0 2 7.1

1 3 - 0 4

Zero-amount Display & Print Format

(may vary depending on the designation in the last

“Sales

Memory

Clear’’ or “All

Memory

Clear“ (refer

to the MIowing pages.) Initial Format: 0.00

- 1 3 4 -

Advertising