Plu spp (split-package-pricing), Open-price plu of spp type, Preset-price plu of spp type – Toshiba TEC MA-315-100 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl'11069
3.
You can select the rounding process of the fractions of the product (result of
multiplication) -- ROUND OFF (initial setting), ROUND UP, or ROUND DOWN.
(Refer to Chapter "22. System Option Se№ng" Address 2 - Bits 1 and 2.)
Receipt Print Format for PLU Quantity Extension
PLU Code
Quantity
Unit Price
Product
PLU SPP (Split-Package-Pricing):
This operation is used when a customer purchases only part but not all of the items in a
PLU package (example; only two tomatoes in a priced package of three tomatoes). (Also,
refer to **Department SPP" already described.)
(Q’ty« Quantity)
Purchased Q'ty
max. 3 digits
(integer only)
©/FOR
]-
Open-price PLU of SPP Type
PLU Code
max. 3 digits;
1 U>999
PLU
Whole Package
Price
max. 6 digits
AMT
If an error occurs here:
I
PossiUe cause of error:
■ • Product exceeding 7 digits.
i -► Check the Purch^ed Q’ty.
■ • The Purchased Q’ty contains decimal portion.
Check the Purchased Q’ty.
I • The PLU is not a SPP-type PLU.
Check the PLU Code.
Preset-price PLU of SPP Type
L-^
PLU Code
PLU
Whole
Package
Quantity
PLU Code
max 3 digite;
1 to 999
Receipt Print Format for PLU SPP
(The preset price is
regarded as the Whole
Package Price.)
-►3.*10.00
9^
& X
-► PL
6 0 . 1
★ 1
6.6
7
TM
Whole Package Price
Purchased Quantity
■Product
NOTES 1. The product (final result amount) obtained by SPP cannot be repeated.
2. The product must not exceed 7 digits.
3.
The rounding process of the fractions of the product is ROUND UP PRODUCT
as initial status. It can be changed to ROUND UP ITEM PRICE (refer to
Chapter 22, System Option Address 2 • Bit 5).
4.
PLU SPP is possible only using the PLUs of SPP Type (i.e., programmed with
Whole Package Quantity).
-54 -