R off” (receipt off) lamp status change operations, Receipt-issue/non-issue selection – Toshiba TEC MA-315-100 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

EOl-11069

18. Setting Preparation of Each Key, and Transaction

Entries

This chapter describes individual key operations on transaction entries, and

setting requirements for the key if necessary.

Receipt-issue/Non-issue Selection

(

log

/

receipt

Key)

Receipts are issued or not issued according to the "R OFF" triangular lamp illuminated/

extinguished status on the Operator Display panel.

"R OFF” (Receipt OFF) Lamp Status Change Operations

any position except

OFF.

LOG 1

in

RECEIPT!

LOG 1

Extinguished

receipt

!

Receipt ON

Status

if:-

tltuminated

Receipt OFF

Status

NOTES 1.

2

.

3.

4.

The Control Lock may be in any position (except OFF position) for changing the
Receipt ON/OFF status in the signed^ON or signed-OFF condition.

The "f? OFF” lamp status at the starting of a transaction entry decides whether a

receipt will be issued for the transaction or not Switching the Receipt ON/OFF

status during a transaction wilt not be effective.

If a transaction entered with the **R OFF” lamp extinguished and knalized but a

receipt is required, the [RECEIPT ISSUE] (Post-issue Receipt) key can be operated

to issue a receipt (see “Post-issue Receipt" on page 85).

Simply depress the [LOG/RECEIPT] key without a numeric entry. If the key is

depressed with a prior numeric entry in “REG”, “MGR”, or

“El”

mode, it may turn

out to be a Sign ON or Sign OFF operation when the Singing Method is selected for
cashier identification (refer to the preceding chapter). However, if any Declaration

Key (such as [RTN MDSE]) is already pressed and then the [LOG/RECEIPT] key is

pressed, the Declaration Key entry is not canceled by the Receipt ON/OFF status

change.

- 3 8 -

Advertising