Toshiba TEC MA-315-100 - Manual (Page 55)

E01-11069
PLU Repeat Entry;
Depress again the last key of the sequence for “Entry of One PLU Item” on the preceding
page. The item entry is repeated as many times as the last key Is depressed. (A negative
PLU entry cannot be repeated.)
Preset-price PLU
PLU
PLU Code
PLU
to repeat
Open-price PLU
PI. 2 0.0
* 1 0.0 0 TM
PL 2 0.0
*10.0 0 TM
PLU Code
PLU
Price
AMT
to repeat
PLU Quantity Extension (Muitipiication):
When more than three or four items are to be entered with the same PLU item, the
Quantity Extension (multiplication) is quicker than the Repeat Entry.
Preset-price PLU
□........... □
Quantity;
max. 6 digits
0.001 to 999,999
i.
nnnnnnn
3 digits for
integer (max.) 3 digits for
decimal (max.)
Required only for any
decimal portion entry.
123: ex.) 123: |T1[^r^
23.4; [Tirill . I 4
0.234: ( 0 ) Q [ T ] [ 3 ] g i
Open-price PLU
PLU
PLU Code
max. 3 digits;
1 to 999
......□
Quantity;
max. 6 digits
0.001 to 999.999
t
f
i
If an error occurs here:
Possible cause of error:
I • Product exceeding 7 digits,
j -► Check the Quantity.
If an error occurs here:
Possible cause of error:
• Exceeding the digit limit
r - - l f an error occurs here:
Possible cause of error:
• Exceeding the LC of the link
Department
Check the Unit Price.
See Listing
Capacity Open.
• Product exceeding 7 digits.
-»■ Check the Quantity
and Unit Price.
©/FOR
Unit Price
max. 6 digits
AMT
NOTES 1. The product obtained by Quantity Extension cannot be repeated.
2. The decimal portion of the Quantity entry is processed down to the 2 digits
below the decimal point. The fraction rounding at this time is fixed to ROUND
OFF.
- 5 3 -