Toshiba TEC MA-315-100 - Manual (Page 48)

EOl-11069
Department Quantity Extension (Multiplication):
When more than three or four items are to be entered with the same Department and
price, the Quantity Extension (multiplication) is quicker than the Repeat Entry.
If an error occurs here:
! Possible cause of error:
I
' • Exceeding the digit limit
□............□
Quan%;
max. 6 digits
0.001 to 999.999
NOTE 1
innmmr
3 digits for
integer (max.)
ex.)
3 digits for
decimal (max.)
Required only for any
decimal portion entry.
123:
23.4:
0.234:
Open-price
Department
□....... DFn.(
Unit Price;
max. 6 digits
Product must not \
exceed 7 digits. /
Preset-price
Department
Dept
If an error occurs here:
Possible cause of error:
• Exceeding the LC of the
Department
Check die Unit Price.
-*■ See Listing
Capacity Open.
• Product exceeding 7 digits.
Check the Quantity
and Unit Price.
• Department requiring
Mmiager Intervention?
Ask the mangier to
turn the Control Lock
to MGR.
Product must not
exceed 7 digits.
miuB
H10ITH
(lo])[I][I][3l4]
If an error occurs here:
Possible cause of error:
• Product exceeding 7 digits.
-»■ Check the Quantity.
• Department requiring Manager
Intervention?
^ Ask the manager to turn the
Control Lock to MGR.
NOTES 1. When the Quantity is a 1-digit integer (1 to 9) and a Preset-price Department
Key is to follow, the [@/FOR] key is omissible.
2. The product obtained by Quantity Extension cannof be repeated,
3. The decimal portion of the Quantity entry is processed down to the 2 digits
below the decimal point The fraction rounding at this time is fixed to ROUND
OFF.
4. You can select the rounding process of the fractions of the product (result of
multiplication) - ROUND OFF (initiaf setting), ROUND UP, or ROUND DOWN.
(Refdr to Chapter *'22. System Option Setting” Address 2 - Bits 1 end 2.
Receipt Print Format for Department Quantity Extension
Department
No.
Quantity
Unit Price
Product
4 6 -