Toshiba D-VR610KU User Manual
D-vr, Owner's manual, Toshiba
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TOSHIBA
gyp gyp gyp
(oltiffi llDil ill
I
Rewritable
I
DIGITAL AUDIO
Recordable
DVD+ReWritable
DVD+R
DVD VIDEO RECORDER/VIDEO CASSEHE RECORDER
D-VR
610
KU
OWNER'S MANUAL
dts RW
HSmi
Digital Out
COMPATIBLE
HIGH-DEFINITION MULTIMEDIA INTERFACE
© 2008 Toshiba Corporation
Owner's Record
The model number and serial number are on the back
of your DVD Recorder. Record these numbers in the spaces
below. Refer to these numbers whenever you
communicate with your Toshiba dealer about this DVD
Recorder.
Model number: |.................................................... |
Serial number:
I
1
Advertising
Table of contents
Document Outline
- Owner's Record
- RADIO-TV INTERFERENCE
- IR Signal Check
- Remote Control
- Open the cover.
- 2
- Close the cover. * •
- 1. INPUT SELECT -© button
- 3. Number/Character buttons
- 4. SETUP button
- 5. DISC MENU button (DVD)
- 6. Cursor A /T/ ◄/► buttons
- 8. INSTANT SKIP button (DVD)
- 10. PLAY^ button
- 11. SKIP button (DVD)
- 12. PAUSE 11 button
- 13. DUBBING button
- 15. TIMER SET button
- 16. HDMI button (DVD)
- 17. I/O ON/STANDBY button
- 18. TRACKING /\ / \/ buttons (VCR)
- 19. SAT.LINK button
- 20. TIMER PROG, button
- 21. AUDIO OGD button DVD mode:
- 22. DISPLAY button
- 23. TOP MENU button (DVD)
- 24. ENTER button
- 25. RETURN button
- 26. TIME SLIP button (DVD)
- 27.1.3x/0.8x PLAY button (DVD)
- 29. SKIP »\ button (DVD)
- 30. STOP ■ button
- 31. DVD button
- 32. VCR button
- 35. ZOOM button (DVD)
- 36. SEARCH button (VCR)
- DVD mode
- VCRmode
- The on-screen display changes in the following order as you press [DISPLAY].
- ► OFF
- 1. General Setting:
- 2. Tinner Programming:
- 3. Title List:
- 4. DVD Menu:
- 5. CD Playback Mode:
- 1. Playback:
- 2. Display:
- 3. Video:
- 4. Recording:
- 5. Clock:
- 6. DivX:
- 7. HDMI:
- 8. Reset All:
- 2. Finalize:
- 5. Random Play:
- H OD VCR M DB H 49 DVD
- Close the cover. * •
- 1
- 2
- 3
- 4
- 5
- 6
- Make one of the following connections, depending on the capabilities of your existing device. VCR and basic DVD connection
- Available for DVD only
- analog audio
- Supplied cables used in this connection are as follows:
- Method 1
- Method 2
- Available for DVD only
- HDMI Mode and Actual Output Signals
- Press [HDMI] •
- Actual Output Modes by Media
- 1
- 2
- 3
- 4
- 2
- 3
- 1
- 2
- 5
- 6
- 7
- 8
- 1
- 2
- 3
- 4
- 5
- 2
- 2
- 3
- 4
- 5
- 3
- 4
- 5
- 4
- 2
- Use [a / T] to select "New Program", then press [ENTER].
- 3
- 4
- 5
- 7
- 6
- 8
- 9
- 1
- 2
- 3
- 4
- 5
- 7
- 2
- 3
- 4
- 5
- 6
- 7
- 1
- 2
- 3
- 4
- 4
- 5
- 6
- 7
- 8
- 9
- 5
- 6
- 7
- 8
- 9
- 1
- 2
- 3
- 1
- 2
- 3
- Press [OPEN/CLOSE to close the disc tray.
- Use [a / T] to select the desired folder or file, then press [ENTER].
- 40xS20x
- 2)Press [PLAY ►] to return to the normal playback.
- Rapid playback function is available only during playback.
- 1) During playback, press [1.3X / 0.8X PLAY].
- 2) Press [PLAY ►] to return to the normal playback.
- Press [DVD] first.
- 1) During playback, press [PAUSE 11]. Then press [FWD^^]or[REV^^].
- 2) Press [PLAY ►] to return to the normal playback.
- Press [DVD] first.
- 1) During playback, press [PAUSE 11].
- 2) Press [SKIP^M ] repeatedly.
- 3) Press [PLAY ►] to return to the normal playback.
- Press [DVD] first.
- 1) During playback, press [DISPLAY] or [ZOOM].
- 3)Use [A / T] to select a desired zoom factor to zoom, then press [ENTER].
- 4) Use [A / T / ◄ / ►] to select a desired zoom
- 1) During playback, press [DISPLAY].
- 4)To return to the marker:
- 1)During recording, press [PLAY^].
- 2) Press [STOP ■] once to stop playback.
- 1) While viewing a TV broadcast via this unit, press [TIME SLIP];
- 2) Press [TIME SLIP] again.
- 3) Press [STOP ■] once to stop playback.
- 1) During recording, press [DISPLAY].
- 2) Select icon using [◄
- Title:
- Chapter:
- 3) Press [STOP ■] once to stop playback.
- Using [SKIP 1-^ ] / [SKIP ]
- Using [DISPLAY]
- Using [SKIP ] / [SKIP ]
- Using [DISPLAY]
- Press [DVD] first.
- 1) During playback, press [DISPLAY].
- 3) Use [A /▼/◄/►] or [the Number buttons] to enter a desired time to search, then press [ENTER].
- 1) During playback, press [DISPLAY] or [REPEAT].
- 3)Use [A / ▼] to select a desired option to repeat, then press [ENTER].
- Title:
- 1) Press [SETUP] in stop mode.
- 2) Use [A /T] to select "CD Playback Mode", then press [ENTER].
- 3) Use [A / T] to select "Random Play", then press [ENTER].
- 1) During playback, press [DISPLAY].
- 3)Use [A /T] to select a desired subtitle language, then press [ENTER].
- 1) During playback, press [DISPLAY] or [AUDIO GGD].
- 3) Use [a / T] to select a desired audio soundtrack or audio channel, then press [ENTER].
- 1) During playback, press [DISPLAY].
- 3)Use [A / ▼] to select "OFF", "Type 1" or "Type 2", then press [ENTER].
- 1) During playback, press [DISPLAY].
- 2) Use [/ ►] to select Q, then press [ENTER].
- 3)Use [A / ▼] to, select "Noise Reduction", then press [ENTER].
- 4) Use [A / T] to select a desired option, then press [ENTER].
- 1) During playback, press [DISPLAY].
- 3)Use [A / T] to select "Black Level", then press [ENTER].
- 4) Use [A / ▼] to select "ON", then press [ENTER].
- Press [TOP MENU].
- 5. Title name
- Press [RETURN] to exit the title list.
- After the disc is fully recorded:
- Press [DVD].
- In stop mode, press [TOP MENU].
- 2
- 3
- 5
- 1
- 2
- 3
- 4
- 5
- 2
- 3
- 4
- 1
- 2
- 4
- 6
- Guide to Edit Title Name
- Oiagt
- 1
- 2
- 3
- 5
- 6
- 7
- 1
- 3
- 4
- 5
- 7
- 1
- 2
- 3
- 5
- 6
- 3
- 4
- 5
- 1
- 2
- 7
- 2
- 1
- 2
- 4
- 1
- 2
- 4
- 5
- 1
- 3
- 2
- 4
- 5
- • Use [the Number buttons] to enter the current password.
- Audio Out
- Use [A / ▼] to select a setting, then press [ENTER].
- Select a setting using [a / T], then press [ENTER].
- OFF
- Use [A / ▼] to select a setting, then press [ENTER].
- Disc Menu Language (Default: English)
- Subtitle Language (Default: OFF)
- When you finish entering the code, press [ENTER] Refer to the language code table on page 106.
- Angle Icon (Default: ON)
- Field
- 1
- 2
- 1
- 2
- 3
- 4
- 5
- 1
- 3
- 1
- 2
- 3
- 2
- 3
- 1) Press [I/O ON/STANDBY] on the remote control or the front panel of the unit.
- 2) Insert a prerecorded cassette tape. Press [PLAY to begin playback.
- 3) During playback, press [PAUSE 11].
- 4) Press [PLAY^] to resume playback.
- 5) Press [STOP ■] to stop playback.
- 6) Press [OPEN/CLOSE to eject the cassette tape.
- Press [VCR] first.
- 1) Press [REC •] to begin the recording.
- 2) Press [STOP ■] when the recording is completed.
- wBwor«lina(QTB)
- DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER
- STOP