Settings for the video input – Toshiba D-VR610KU User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SETTINGS FOR THE VIDEO INPUT
You must let the unit know which video input jack you are using before making a recording.
Press [SETUP],
□ □ □ □ □
TOSHIBA
SE-R0295
□ □ □ □ □
1
2
Use [
a
/ T] to select "General
Setting", then press [ENTER].
3
Use [
a
/ T] to select "Video", then
press [ENTER].
4
Use [
a
/ T] to select "Select Video",
then press [ENTER].
5
Use [▲ / T] to select the input jack
type to connect, then press [ENTER],
If you want to use VIDEO IN jack, select "Video
In".
If you want to use S-VIDEO IN jack, select
"S-Video In".
6
Press [SETUP] to exit.
20 EN
Advertising