Press [rec •] to start recording, This operation may take awhile to be completed – Toshiba D-VR610KU User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press [REC •] to start recording.
will be displayed for 5 seconds.
7
Press [STOP ■] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List" on page 70.)
Press [PAUSE II] to pause recording.
Press [PAUSE 11] or [REC •] again to restart
recording.
To set one-touch timer recording (OTR)...
I
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC •] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
This operation may take
awhile to be completed.
^0:30.^
(normal recording) 1:00
8:00
7:30
• To change the recording length during one-touch
timer recording, press [REC •] repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press [STOP!].
Note
• When you press [REC #], recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• You cannot change the recording mode during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
; - Turning off the power (One-touch timer recording will be canceled.).
- Using [REC #] or [STOP ■] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby
mode to use the unit continuously.
EN 37