Toshiba D-VR610KU - Manual (Page 47)

DVC to DVD Dubbing
r~wrnsmrm^rssBnssL
Before recording fronn DVC, see page 44 for connection
instructions.
Press [DVD] first.
Preparing for DV to DVD dubbing:
• Insert a recordable disc and make sure your DVC is in
video mode.
1
Use [INPUT SELECT -©] to select "DV".
DV
r“’ AB-1234
□ 0 : 00:00
2
3
Press [REC MODE] to select a
recording mode.
(Refer to ''Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.)
Press [DISPLAY].
4
5
6
7
With "Control" highlighted, press
[ENTER] to display the available
devices to control with the remote
control of this unit. Use [A / T] to
select "DVC", then press [ENTER].
»Xtil
3 1/1
: Control
DV Audio
Start Rec
DVD
Stereol
§
DV
A8-1234
0:12:34
□ XP
¡iPillB
Now you can operate your DVC with the remote
control of this unit.
Press [PLAY ^] to start playing back
the DVC, and find where you wish to
start dubbing.
Then, press [STOP ■] when you come
to the desired start point.
Use [A / T] to select "Start Rec", then
press [ENTER].
The dubbing will start.
To stop dubbing;
Use [ a / ▼] to select "Control", then
press [ENTER].
Use [ a / T] to select "DVD", then
press [ENTER].
Then press [STOP ■].
EN 47