Toshiba D-VR610KU - Manual (Page 94)

GENERAI SETTiWG
Video
Press [STOPS] if you are playing back a disc.
1
Press [SETUP] and use [A / T] to
select "General Setting", then press
[ENTER].
2 Use [A / T] to select "Video", then
press [ENTER].
3 Use [A / ▼ ] to select a desired item,
then press [ENTER].
Progressive
TV Aspect
Select Video
Subnnenu will appear.
4
5
Refer IjJ to on this page and set
the selected item.
• Ij]' "SETTINGS FOR THE VIDEO
INPUT" on page 20.
When you finish with the setting,
press [SETUP] to exit.
94 EN
[ül Progressive (Default: OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [A / T] to select "ON", then press [ENTER].
Playback
Display
Video
Recording
CiocN
OivX
HDMI
□ ON
m
2 ) Use [◄/►] to select "Yes", then press [ENTER]
General Setting
Activettng pfc^reseive scan:
Chedc your TV has pro^ossive scan
and connect with component video cabto.
NOTE:
If there is no picture or picture is
dtettified after seiacting “Yes’',
Watt about 16 seconds for auto recovery.
Yes No
3) Use [A / T] to select "Yes" within 15 seconds, then
press [ENTER].
Your setting will be activated.
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to "Method 2" on page 21 or page 22.) If not, use
the RCA video cable and set the progressive scan to "OFF".
• If the Progressive Scan Image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The "Progressive" setting will be "OFF".
• When selecting "No" or not pressing any buttons on
the unit or remote control within .15 seconds at step 3,
progressive scan remains to be "OFF" (Interlace scan).
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [A / ▼] to select a desired option, then press [ENTER].
L5 G«»ndS«tting
Piay»ek
Display
1 Progressive
Video WflUNpuct .
Recording
Clock
12 4:3 Letter Box
DivX n 4:3Pim»Scan
HDMI □ 16:gWi(te ■
Reset All
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".