Press [setup, Use [▲ / t] to select "dvd menu' then press [enter, Use [a / t] to select "yes", then press [enter – Toshiba D-VR610KU User Manual
Page 29: Setting a disc to protect
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from "DVD Menu" menu.
□ □ □ □ □
TOSHIBA
SE-R0295
□ □ □ □ □
1
Press [SETUP].
2
Use [▲ /
T]
to select "DVD Menu'
then press [ENTER].
3
Use
[
a
/ T]
to select "Disc Protect
OFF A ON", then press [ENTER].
e.g.) VR mode DVD-RW
4
Use
[
a
/ T]
to select "Yes", then press
[ENTER].
This operation may take
awhile to be completed.
Note
To cancel the disc protect:
• When you insert a disc protected with this unit,
"Disc Protect ON A OFF" will appear instead of "OFF
AON".
iFom
1 D
isc
Protect ON c> OFF
To release the protection for the disc, select "Disc
Protect ON A OFF" at step 3, then follow rest of the
procedures.
EN 29