Toshiba TEC MA-1100-100 SERIES - Manual (Page 126)

4) TOTAL PRINT DOUBLE SLIP WITH OR WITHOUT TRAILER LINE
Address #10 Bit 4** (This Bit is effective only when Bit 3 is
selected to the "SET" status.)
RESET (standard):
The second total line is printed WITHOUT
THE TRAILER LINE, in the Double Slip form.
SET (option): The second total line is printed WITH THE
TRAILER LINE as well as the fisrt total line,
in the Doubl Slip form.
"TRAILER LINE" means the print line routine of Date,
Register No., Clerk ID, Receipt Consecutive No., and Time.
4- The gap of the slip inlet is usually opened, and the slip may be inserted
or withdrawn freely.
When a slip is properly set to the remote slip printer and the ECR is
operated, the gap will be closed and printing will be performed. When
the sale is finalized, the receipt is issued and then the gap of the
DRS-105 will be opened to allow the slip withdrawal. (The gap keeps
closed during registration.)
5, Prining on the remote slip will be perfomed alternately with printing on
the receipt/journal of the ECR.
6 . The EJECT Key on the DRS-105 may be used to open the closed gap in order
to withdraw the slip and skip unnecessary item print. The EJECT key will
be disregarded if the slipis set and the ECR receipt/journal printer is
in a printing action.
7- Printing Position and Slip Size
1 88.4mm 1 7.8mm
( 42.2 digits)
1 Print Space 1
r-------------------- 1
1 Last Line 1
21,2mm minimum'
'■NOTE: The space below the "Last Line" (i.e. the 21,2mm area at the
bottom) cannot be printed.
- 122 -