Toshiba TEC MA-1100-100 SERIES - Manual (Page 13)

If the I %+1 key is used immediately after a previous balance entered
through
the IPB+1 key ^ the percent rate is added to the previous
balance. But the
\%~\
key cannot be used in this case. Neither may
the S3 or I %~! key be used immediately after a previous balance
entered through the IPB-I key.
iPLUl PLU (Price-Look-Up) KEY
This key is used to enter a PLU that is linked to a department. Each
PLU can be programmed to be preset PLU (to allow the preset price
entry only) or an open PLU (to allow a price entry through the numeric
keys each time).
TO ENTER THROUGH PRESET PLU:
PLU Code! ■
1-3 digits
PLU The preset price will automatically
be read and entered.
to repeat the same PLU price, depress
the IPLU[ only, after the above
operation.
TO ENTER THROUGH OPEN PLU;
PLU Code! -
1~3 digits
PLU price ! fAMTl
The price indexed on the numeric keys
will be entered.
To
repeat the same PLU price, depress
the
I
AMT
I
key only, after the above
operation.
As for quantity extension and split pricing involving PLUs, refer
to the "REGISTERING PROCEDURE FOR SALES".
Each PLU is programmed with a 3-digit PLU Code, a 2-digit linked
Department Code, and if used as a preset PLU, a maximum of 6-digit
preset
price (5-digit for UK and BE versions). Each PLU is also
programmed with the S.I. or non-S.I. status.
llC/VDl ITEM CORRECT / VOID KEY
This is a dual-function key that has both
I
ITEM CORK
I
(item Correct)
^nd I void ! (Designated Line Void) key functions. (These two keys
can separately be installed as optional keys inplace of the j^C/VD j
key.)
ITEM CORRECT FUNCTION;
If depressed (without a prior numeric entry) after an item-
correctable entry, it functions as Item Correct key, removing the
last item from the bill and printing a etched lined through that
item on the receipt and journal.
The item-correct function is effective even when a numeric entry
and a [3 key depression are done between the department entry to
be corrected and the 1IC/V d I key depression.
- 9