Comtrol RocketPort Windows 98 - Manual (Page 24)

24 Advanced Configuration
Windows 95/98
Remapping Baud Rates
This option lets you remap the 300, 600, 1200, and 2400 baud rates to
more useful values. A common use of this option is to enable an
application to use a higher baud rate than is otherwise available.
Once a value is placed in one of the mapped fields, whenever an
application selects the mapped rate, the alternate rate is used instead.
For example, if you map 300 to 115200, then select 300 baud in an
application, the actual baud rate used is 115,200.
Follow these steps to remap baud rates:
1. Access the System Properties window. (Either double-click on the
Control Panel System icon or right-click on the My Computer icon
and select Properties.)
2. Select the Device Manager tab.
3. Double-click on Multi-function adapters.
4. Select the RocketPort/RocketModem and click Properties.
5. Select the Board Options tab.
6. Click the Advanced button. This window displays:
7. In the Baud Rate Mapping section of this window, select the rate
you want to remap.
8. Use the droplist to select a new baud rate, or type in a value.
Note: See the Hardware Installation Card to determine which
baud rates are supported by your RocketPort or
RocketModem.