Comtrol RocketPort Windows 98 - Manual (Page 31)

Configuring Printers 31
Windows 95/98
9. Click Finish. The Modems Properties window displays:
10. To add more modems, click the Add button and repeat Steps 4
through 9.
11. Optionally:
a. Click Dialing Properties to configure basic phone service
information.
b. Highlight a modem and click Properties to configure port speed,
data bits, parity, and so on.
c. Click the Diagnostics tab, then select a port and click More Info
to query and test the modem.
12. When you are done, click Close to exit the Install New Modem
wizard. Your changes take effect immediately. No reboot is
required.
Configuring Printers
Follow these steps to connect a serial printer to a RocketPort.
Note: You may need the Windows 95 or Windows 98 CD-ROM in
order to load drivers and complete printer installation. Make
sure you have this CD on-hand before beginning the process.