Comtrol RocketPort Windows 98 - Manual (Page 26)

26 Advanced Configuration
Windows 95/98
Changing the IRQ
If you experience IRQ conflicts or need to make more substantial
changes beyond disabling IRQ use, follow these steps:
1. Access the System Properties window.
2. Select the Device Manager tab.
3. Double-click on Multi-function adapters.
4. Select the RocketPort/RocketModem and click Properties.
5. Select the Resources tab.
6. Select Interrupt Request.
7. Click the Change Setting button.
8. Use the Value control to adjust the interrupt. The range of
available options is determined by the board type. If a PCI-bus
adapter is installed, you cannot change the interrupt.
If all the Comtrol boards in the computer are ISA-bus, your options
are None, 3, 4, 5, 9, 10, 11, 12, or 15.