Flintec II PC-BASED - Manual (Page 7)

FlintWeigh Technical Manual, Rev. 3.03 November 2011 Page 7 of 32
4. System Components and Technical Characteristics
4.1. Type FW-01 Scale Interface
Fig.4.1 Scale interface, connector side
Fig.4.2 Scale Interface; calibration lock (will be sealed in legal for trade applications)
Digital
Input/Output
Digital
Load cells
USB Supply 12 V DC
Digital
Input/Output
Digital
Load cells
USB Supply 12 V DC
Fig.4.3 Scale Interface; connectors
- Digital load cell connector suitable for connecting RC3D load cells or one/two units of LDU xx.x in
half-duplex mode, see LDU xx.x manual
- External 12 V supply required for powering the digital load cells / LDU units
Calibration lock