Futaba GY611 - Manual (Page 28)

28
D
ATA
S
ETTING
When Using a Transmitter End Point (ATV) Function
The End Point (ATV) function lets operator perform a gain adjustment at
each selector switch position.
[GY611 Settings]
Select the gyro operation mode at the GY611 Mode screen. (AVC, NOR, or
CMT)
[Transmitter Settings]
End Poin (ATV) function:
Set the rates at the transmitter remote gain channel (CH5, etc.) End Point
(ATV) function.
[Sensitivity Display]
The gain display indicates the actual gain at the GY611 normal screen dis-
play. The following shows the relationship between transmitter and gyro set-
ting.
[Relationship between transmitter and gyro setting]
Transmitter settings:
End Point (ATV) rates
Switch Switch
Forward side Front side
90% - 0% - 90%
Normal mode
AVCS mode
Normal mode AVCS mode
(G2) (G1)
Actual gain: 100% - 0% - 100%
NOR:
AVC:
CMT:
GY611 mode
settings: