Globalstar SmartOne - Manual (Page 14)

SmartOne Manual Rev 1.4 DOC# 9100-0268-01 p.14
User Data Entry Pane
The user data entry pane contains a context-switched user entry area for
displaying and inputting configuration data. The information is
organized in pages with page manipulation provided through tabs along
the top of the pane. Selecting a tab will change the context of the
upper pane. The tabs are named to group similar functions on the same
page. The tabs will change according to the operation Mode selected.
The Back and Next buttons allow the user to move from tab to tab without
clicking on the tab name.
Status Pane
The Status Pane contains a table with a list of devices connected to the
PC, their ESN(s), firmware version and COMM port assigned to each device
as well as the execution buttons for configuring connected
SMARTONE(s).
ESN Status Display Table
ESN Column - This column displays a list of the Electronic Serial
Numbers for
SMARTONE(s) connected to the PC.
FW Ver Column - This column displays a list of firmware version for the
main processor for each
SMARTONE in the list.
COM Column - This column displays a list of the assigned serial
communication ports for each
SMARTONE.
List ESN(s) Button
This button shall cause the Configuration Software to search for any
valid devices that are connected to the PC.
A pop up window informs the user that the program is searching for
devices connected to the computer while this search is being performed.