Globalstar SmartOne - Manual (Page 17)

SmartOne Manual Rev 1.4 DOC# 9100-0268-01 p.17
Save Configuration. This will open a window that allows the user to
browse to a location and save all of the configuration settings to two
separate files:
The configuration file. This file is non-editable.
A text file. An ASCII format file that contains each parameter and
parameter value in a standard delimited format.
Open Configuration from History. Every time a device is successfully
programmed, the configuration will save that occurrence to a text log
file. The information stored is the ESN of the device, the local time
at which it was programmed and the actual configuration of the device.
When selected, a window opens where the user can sort by ESN or
date/time of programming and select a configuration. This loads the
selected configuration settings into the User Data Entry Pane, but not
into any device(s) connected to the PC.
Exit. This causes the program to close.
Tools Menu
SMARTONE Testing. This command opens up a window with the following
options: