Globalstar SmartOne - Manual (Page 16)

SmartOne Manual Rev 1.4 DOC# 9100-0268-01 p.16
Program Button
The PROGRAM button in the Status Pane is used to send the data in the
Configuration Software to the connected
SMARTONE (s). The SMARTONE will
be updated with the data from the Configuration Software.
The user is queried to confirm device program before execution of the
function.
File Menu in the View Summary Window allows the user to either save the
configuration to file or print configuration.
Toolbar
File Menu
New Configuration. This will reset the values for all configurable
parameters to default. Standard Messaging without Motion with a
transmission every 12 hours is the default Mode of operation.
This selection will open a prompt window asking for confirmation to
restore all settings to their default. This will not affect the settings
stored inside the connected
SMARTONE(s). The settings will only reset in
the software display, not in any device(s) connected to the PC unless
the PROGRAM button is clicked to download configuration to the device.
Open Configuration from File. This opens a window that allows the user
to browse for a valid configuration file that has previously been saved.
Selecting a file will cause all of the settings contained in the file to
be loaded into the software display only, not in any devices connected
to the PC. Click the PROGRAM button to download configuration to the
device.
Read Configuration from SMARTONE. This will query all of the
configurable parameters saved in a device connected to the PC. The
values for each configurable parameter in the device will be displayed
in the User Data Entry Pane.