GMC 2009 Sierra - Manual (Page 395)

A. Spare Tire
(Valve Stem
Pointed Down)
B. Hoist Assembly
C. Hoist Cable
D. Tire/Wheel Retainer
E. Hoist Shaft
F. Hoist End of
Extension Tool
G. Hoist Shaft Access Hole
H. Wheel Wrench
I. Jack Handle Extensions
J. Spare Tire Lock
(If Equipped)
1. If your vehicle is equipped with a spare tire lock,
insert the ignition key, turn it clockwise and then
pull it to remove the spare tire lock.
2. Assemble the wheel wrench (H) and the two jack
handle extensions (I) as shown.
3. Insert the hoist end
(open end) (F) of
the extension through
the hole (G) in the
rear bumper.
Be sure the hoist end of the extension connects
to the hoist shaft (E). The ribbed square end of
the extension is used to lower the spare tire.
5-83