GMC 2009 Sierra - Manual (Page 9)

To save your positions in memory, do the following:
1. Adjust the driver’s seat, including the seatback
recliner and lumbar, both outside mirrors, and the
throttle and brake pedals to a comfortable position.
See Outside Power Mirrors on page 2-39 and
Adjustable Throttle and Brake Pedal on page 2-25 for
more information.
Not all mirrors can save and recall the mirror
positions.
2. Press and hold button 1 until two beeps sound.
A second seating, mirror, and throttle and brake pedal
position can be programmed by repeating the above
steps and pressing button 2.
To recall the memory positions, the vehicle must be in
PARK (P). Press and release either button 1 or button 2
corresponding to the desired driving position. The
seat, outside mirrors, and adjustable throttle and brake
pedals will move to the position previously stored.
You will hear a single beep.
If you use the Remote Keyless Entry (RKE) transmitter
to enter your vehicle and the remote recall memory
feature is on, automatic seat, mirror, and adjustable
pedal movement will occur. See “MEMORY SEAT
RECALL” under DIC Vehicle Customization (With DIC
Buttons) on page 3-68 for more information.
To stop recall movement of the memory feature at any
time, press one of the power seat controls, memory
buttons, power mirror buttons, or adjustable pedal
switch.
If something has blocked the driver’s seat and/or the
adjustable pedals while recalling a memory position, the
driver’s seat and/or the adjustable pedals recall may
stop working. If this happens, press the appropriate
control for the area that is not recalling for two seconds,
after the obstruction is removed. Then try recalling
the memory position again by pressing the appropriate
memory button. If the memory position is still not
recalling, see your dealer for service.
1-5