Golden Lighting 1030-6 CH - Manual

Canopy
1ea
Mounting Screws 2ea Top loop 1ea
Chain 6ft Wire Connectors 3ea Spring Washer 1ea
Chain connector 2ea
Canopy Loop
with Collar
1ea Nipple 1ea
Mounting Strap 1ea Hex Nut 3ea
Green Ground
Screw
1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
ASSEMBLING THE FIXTURE (Fig.1)
1. Grasp the fixture wires and align the Center column
Nipple (M) to Fixture coupler (I) and thread Center
column(M) to Fixture coupler (I) until tight. Ensure the
fixture wires are not pinched in the coupler.
2. Gently spread the arms until evenly spaced if arms
are packed closed.
3. The Center column rings may be turned to your
desired angle.
1030-6 CH
Read and review installation instruction sheet before
assembling the fixture.
Fig 1
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Cerchi 1030-6 CH
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________