Golden Lighting 1157-3P CH/AB - Manual

Canopy Wire Connectors Top Loop
1ea 3ea A4 Orange 1ea D50 x 60mm
Chain
Junction Box
Screw
Spring Washer
1ea 6ft x3.8mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain
Connector
Nipple
2ea @4.2X50mm 1ea @3/8 x 40mm x 5mm 1ea @3/8 x 455mm
Mounting Strap
w/ ground screw
Hex Nut
1ea 3/4"X4" 2ea @3/8 x 3mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS LIST
Company Name:_______________________ Co. Account #:_____________
to be filled out by retailer
Fixture Name: Payton 1157-3P CH/AB
This fixture assembled PO:__________ Date: ________
PARTS & ASSEMBLY SHEET
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note on this sheet and contact the place of purchase to arrange for replacement
parts.
For Customer Service, contact the place of purchase to arrange for replacement
Canopy Loop
with Collar
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture.
1157-M1L CH/AB
Note: The wire cage and glass shade are
already assembled on the fixture body.
1. Thread the Top Loop (J) onto the nipple of
Fixture Body (M). Hand-tighten until snug.
Fig. 1