Golden Lighting 1212-9 AB - Manual

Canopy Wire Connectors Top Loop
1ea @130x19mm 3ea P4 Orange 1ea W40 x 70mm
Chain
Junction Box
Screw
Spring Washer
1ea 6ft x4.5mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain Connector Nipple
2ea @4.2X50mm 1ea @3/8 x 40mm x 5mm 1ea @3/8 x 40mm
Mounting Strap
w/ ground screw
Hex Nut
1ea 3/4"X4" 2ea @3/8 x 3mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: Corsica 1212-9 AB
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Canopy Loop
with Collar
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
1212-9 AB
1. Thread the threaded pipe/stem (P) into the
coupling at center of fixture body (R).
2. Place the stone column (O) and Top cap (N) over
the stem (P) and secure with the knurled nut (M).
3. Thread the top loop (J) onto the stem (P). Hand-
tighten until snug.
4. Arrange the stone squares for desired effect.
Fig. 1
NOTE: THE STONES ON THE COLUMN WILL NOT BE
UNIFORM IN SIZE OR COLOR
For Customer Service, contact the place of purchase to arrange for replacement parts.
J
M
N
O
P
Q
R
Bulb
(Not Provided)