Golden Lighting 1030-M1L CH - Manual

Canopy
1ea
Mounting
screws
2ea Top loop 1ea
Chain 1ft
Wire
connectors
3ea Nipple 1ea
Chain connector 2ea
Canopy loop
with Collar
1ea Mounting strap 1ea
Socket rings 1ea Hex nut 3ea
Green ground
screw
1ea
12" Rod 2ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: Cerchi 1030-MIL CH
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts
are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture.
1030-MIL CH
ASSEMBLING THE FIXTURE (Fig.1)
1. By measuring determine correct number of rods
and chain needed for proper hanging height.
There is 1 foot of chain and 2 optional 12" rods
included.
2. To shorten the fixture slide the excess 12" rods
off the wire.
3. To lengthen the fixture thread the additional
rods onto the wire or substitute longer chain for
the 1 foot length included.
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.
These two Rods may
be removed
or
additional Rods may
be added.
ROD-12 CH *
additional chain may
be added.
CHAIN-CH *
*available for purchase
separately