Golden Lighting 1089-M1L RSB-PRL - Manual

Canopy Wire connectors Top loop
1ea @5-1/2"X1-1/4" 3ea P3 Orange 1ea @3/8 x 45mm
Chain
Junction Box
Screw
Spring Washer
1ea 1ft x4.2mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain connector Nipple
2ea @3X38mm 1ea @3/8 x 40mm x 5mm 1ea/3ea @3/8 x 65mm/@3/8 x 25mm
Mounting Strap
w/ ground screw
Hex Nut Rod
1ea 3/4"X4" 2ea @3/8 x 3mm 3ea @1/2" x 12"
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Fig. 1
PARTS & ASSEMBLY SHEET
1089-M1RSB
Read and review installation instruction sheet before
assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
This fixture assembled PO:__________ Date: ________
Fixture Name: Pemberly Court 1089-M1L RSB-PRL
Canopy Loop
with Collar
ASSEMBLING THE FIXTURE (Fig.1)
1. By measuring determine correct number of rods and chain
needed for proper hanging height. There are 2 ft of chain and
2 optional 12" rods included.
2. To shorten the fixture slide the excess 12" rods off the
wire.
3. To lengthen the fixture thread the additional rods onto the
wire or substitute longer chain for the 2 foot length included.
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note on this sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
These two Rods
may be removed
or
additional Rods
may be added.
ROD-1089 RSB*
additional chain
may be added.
CHAIN-RSB *
*available for
purchase
separately