Golden Lighting 1051-3P SBZ - Manual

Canopy
1ea
Mounting Screws 2ea
Metal Washer,
Rubber washer
and Spacer
1ea
Chain 6ft Wire connectors 3ea Bottom cap 1ea
Chain connector 2ea
Canopy loop
and Canopy
loop collar
1ea Nipple 2ea
Mounting Strap
Green screws
1set Hex Nut 3ea Finial 1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Hidalgo 1051-3P SBZ
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
1. This fixture is packed with the arms closed. Gently
spread the arms (C) until evenly spaced.
2. Feed the fixture wires through the Top loop (A) and
pull the wires until taut.
3.Then screw the Top Loop (A) to the top of Frame
coupler (B) until tight.
1051-3P SBZ
Read and review installation instruction sheet before
assembling the fixture.
Fig 1