GTCO 2500 Series - Users Guide 1/3 - Manual (Page 2)

2500 Series 2
WARNING
This equipment generates and uses radio frequency energy and if not installed and used properly,
that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio
and television reception. It has been tested and found to comply with the limits for a Class B
computing device in accordance with the specifications in Subpart J of Part 15, FCC Rules, which are
designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that such interference will not occur in a particular installation. If
this equipment does cause interference to radio and television reception, which can be determined
by turning the equipment on and off, the user is encouraged to try to correct the interference by
one or more of the following measures:
 Reorient the receiving antenna.
 Relocate the computer/device with respect to the receiver.
 Move the computer/device away from the receiver.
 Plug the computer into a different outlet so that computer and receiver are on different
circuits.
 Reorient or coil cables.
 Keep cursor or pen on the active area.
 If necessary, consult the dealer or an experienced radio/television technician for additional
suggestions
CAUTION
Any cables the user adds to the device must be shielded to be in compliance with the FCC standards.